 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LESHAN RADIO COMPANY, LTD. 2-Input NOR Gate / CMOS Logic Level Shifter with LSTTL-Compatible Inputs L74VHC1GT02 The L74VHC1GT02 is a single gate 2-input NOR fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation. The internal circuit is composed of three stages, including a buffer output which provides high noise immunity and stable output. The device input is compatible with TTL-type input thresholds and the output has a full 5.0 V CMOS level output swing. The input protection circuitry on this device allows overvoltage tolerance on the input, allowing the device to be used as a logic-level translator from 3.0 V CMOS logic to 5.0 V CMOS Logic or from 1.8 V CMOS logic to 3.0 V CMOS Logic while operating at the high-voltage power supply. The L74VHC1GT02 input structure provides protection when voltages up to 7 V are applied, regardless of the supply voltage. This allows the L74VHC1GT02 to be used to interface 5 V circuits to 3 V circuits. The output structures also provide protection when V CC = 0 V. These input and output structures help prevent device destruction caused by supply voltage - input/output voltage mismatch, battery backup, hot insertion, etc. * High Speed: tPD = 4.7 ns (Typ) at VCC = 5 V * Low Power Dissipation: ICC = 2 mA (Max) at TA = 25C * TTL-Compatible Inputs: VIL = 0.8 V; VIH = 2.0 V * CMOS-Compatible Outputs: VOH > 0.8 VCC ; VOL < 0. 1 VCC @Load * Power Down Protection Provided on Inputs and Outputs 5 4 * Balanced Propagation Delays * Pin and Function Compatible with Other Standard Logic Families * Chip Complexity: FETs = 65; Equivalent Gates = 14 MARKING DIAGRAMS 1 2 3 VJd SC-88A / SOT-353/SC-70 DF SUFFIX Pin 1 d = Date Code 5 4 Y Figure 1. Pinout (Top View) 1 2 3 VJd Figure 2. Logic Symbol Pin 1 d = Date Code TSOP-5/SOT-23/SC-59 DT SUFFIX FUNCTION TABLE PIN ASSIGNMENT 1 2 3 4 5 IN B IN A GND OUT Y V CC A L L H H Inputs B L H L H Output Y H L L L ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. www..com 1/6 LESHAN RADIO COMPANY, LTD. L74VHC1GT02 MAXIMUM RATINGS Symbol V CC V IN V OUT I IK I OK I OUT I CC PD JA TL TJ T stg V ESD Parameter DC Supply Voltage DC Input Voltage DC Output Voltage Value - 0.5 to + 7.0 - 0.5 to 7.0 - 0.5 to 7.0 -0.5 to V cc + 0.5 -20 +20 + 25 +50 200 333 260 + 150 -65 to +150 >2000 > 200 N/A 500 Unit V V V mA mA mA mA mW C/W C C C V V CC=0 High or Low State Input Diode Current Output Diode Current V OUT < GND; V OUT > V CC DC Output Current, per Pin DC Supply Current, V CC and GND Power dissipation in still air SC-88A, TSOP-5 Thermal resistance SC-88A, TSOP-5 Lead Temperature, 1 mm from Case for 10 s Junction Temperature Under Bias Storage temperature ESD Withstand Voltage Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) Above V CC and Below GND at 125C (Note 5) I LATCH-UP Latch-Up Performance mA 1. Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. Functional operation should be restricted to the Recommended Operating Conditions. 2. Tested to EIA/JESD22-A114-A 3. Tested to EIA/JESD22-A115-A 4. Tested to JESD22-C101-A 5. Tested to EIA/JESD78 RECOMMENDED OPERATING CONDITIONS Symbol Parameter V CC DC Supply Voltage V IN DC Input Voltage V OUT DC Output Voltage TA t r ,t f Operating Temperature Range Input Rise and Fall Time V CC = 0 High or Low State V CC = 3.3 0.3 V V CC = 5.0 0.5 V Min 3.0 0.0 0.0 0.0 - 55 0 0 Max 5.5 5.5 5.5 V CC + 125 100 20 Unit V V V C ns/V DEVICE JUNCTION TEMPERATURE VERSUS TIME TO 0.1% BOND FAILURES Junction Temperature C 80 90 100 110 120 130 140 Time, Hours 1,032,200 419,300 178,700 79,600 37,000 17,800 8,900 Time, Years 117.8 47.9 20.4 9.4 4.2 2.0 1.0 NORMALIZED FAILURE RATE 1 1 10 100 1000 TIME, YEARS Figure 3. Failure Rate vs. Time Junction Temperature 2/6 LESHAN RADIO COMPANY, LTD. L74VHC1GT02 DC ELECTRICAL CHARACTERISTICS V Symbol V IH Parameter Minimum High-Level Input Voltage Test Conditions CC T A = 25C Min 1.4 2.0 2.0 0.53 0.8 0.8 2.9 4.4 2.58 3.94 0.0 0.0 0.1 0.1 0.36 0.36 0.1 T A < 85C -55C (V) 3.0 4.5 5.5 Typ Max Max Min 1.4 2.0 2.0 Max Unit V V IL Maximum Low-Level Input Voltage 3.0 4.5 5.5 V IN = V IH or V IL I OH = - 50 A V IN = V IH or V IL I OH = -4 mA 3.0 4.5 3.0 4.5 3.0 4.5 3.0 4.5 0 to5.5 5.5 5.5 0.0 3.0 4.0 2.9 4.4 2.34 3.66 0.53 0.8 0.8 V V OH Minimum High-Level Output Voltage V IN = V IH or V IL V V OL Maximum Low-Level Output Voltage V IN = V IH or V IL I OH = -8 mA V IN = V IH or V IL I OL = 50 A V IN = V IH or V IL I OL = 4 mA V 0.1 0.1 0.52 0.52 1.0 I IN I CC I CCT I OPD Maximum Input Leakage Current Maximum Quiescent Supply Current Quiescent Supply Current Output Leakage Current I OL = 8 mA V IN = 5.5 V or GND V IN = V CC or GND Input: V IN = 3.4 V V OUT = 5.5 V A A mA A 2.0 1.35 0.5 20 1.50 5.0 40 1.65 10 AC ELECTRICAL CHARACTERISTICS C load = 50 pF, Input t r = t f = 3.0 ns T A = 25C Symbol Parameter t PLH , Maximum t PHL Propagation Delay, Input A or B to Y Test Conditions V CC = 3.3 0.3 V C L = 15 pF C L = 50 pF V CC = 5.0 0.5 V C L = 15 pF C L = 50 pF C IN Maximum Input Capacitance Power Dissipation Capacitance (Note 6) Min Typ 4.0 5.8 3.0 3.8 5.5 Max 10.0 13.5 6.7 7.7 10 T A < 85C -55C Typical @ 25C, V CC = 5.0 V 11 pF 6. C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: I CC(OPR) = C PD * V CC * f in + I CC . C PD is used to determine the no- load dynamic power consumption; P D = C PD * V CC 2 * f in + I CC * V CC . 3/6 LESHAN RADIO COMPANY, LTD. L74VHC1GT02 3.0V V OH Y V OL Figure 4. Switching Waveforms *Includes all probe and jig capacitance Figure 5. Test Circuit DEVICE ORDERING INFORMATION Device Nomenclature Device Order Number Temp Circuit Device Range Technology Indicator Function Identifier L L L L L 74 74 74 74 74 VHC1G VHC1G VHC1G VHC1G VHC1G T02 T02 T02 T02 T02 Package Suffix DF DF DF DT DT Tape & Reel Suffix T1 T2 T4 T1 T3 Package Type (Name/SOT#/ Common Name) Tape and Reel Size L74VHC1GT02DFT1 L74VHC1GT02DFT2 L74VHC1GT02DFT4 L74VHC1GT02DTT1 L74VHC1GT02DTT3 SC-70/SC-88A/ SOT-353 SC-70/SC-88A/ SOT-353 SC-70/SC-88A/ SOT-353 SOT-23/TSOPS/ SC-59 SOT-23/TSOPS/ SC-59 178 mm (7 in) 3000 Unit 178 mm (7 in) 3000 Unit 330 mm (13 in) 10,000 Unit 178 mm (7 in) 3000 Unit 330 mm (13 in) 10,000 Unit 4/6 LESHAN RADIO COMPANY, LTD. L74VHC1GT02 PACKAGE DIMENSIONS SC70-5/SC-88A/SOT-353 DF SUFFIX G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A-01 OBSOLETE. NEW STANDARD 419A-02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --- 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --- 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 A 5 4 S 1 2 3 -B- D 5 PL 0.2 (0.008) M B M N J C DIM A B C D G H J K N S H K SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm inches 5/6 LESHAN RADIO COMPANY, LTD. L74VHC1GT02 PACKAGE DIMENSIONS SOT23-5/TSOP-5/SC59-5 DT SUFFIX NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. A AND B DIMENSIONS DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MILLIMETERS MIN MAX 2.90 3.10 1.30 1.70 0.90 1.10 0.25 0.50 0.85 1.05 0.013 0.100 0.10 0.26 0.20 0.60 1.25 1.55 0_ 10 _ 2.50 3.00 INCHES MIN MAX 0.1142 0.1220 0.0512 0.0669 0.0354 0.0433 0.0098 0.0197 0.0335 0.0413 0.0005 0.0040 0.0040 0.0102 0.0079 0.0236 0.0493 0.0610 0_ 10 _ 0.0985 0.1181 D 5 1 2 4 3 S B L G A J C 0.05 (0.002) H K M DIM A B C D G H J K L M S SOLDERING FOOTPRINT* 1.9 0.074 0.95 0.037 2.4 0.094 1.0 0.039 0.7 0.028 SCALE 10:1 mm inches 6/6 |
Price & Availability of L74VHC1GT02
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |